*Techik Intelligent Heat Shrinkable Film Defect Visual Inspection System Introduction

Intelligent Heat Shrinkable Film Visual Inspection System, equipped with high-quality light source, high-frame rate camera, and deep learning intelligent algorithm, effectively replaces the traditional manual detection method and can detect defects such as damage, non-standard wrinkles etc without dead corners.

*Techik Intelligent Heat Shrinkable Film Defect Visual Inspection System Features

• It can realize the detection of heat shrinkage film defects in barrel surface packaging.
• Spray code detection function is optional.
• Convenient for debugging and easy to operate.
• The equipment has stable performance and good detection effect.
• Replace manual labors and improve working efficiency.

   

*Techik Intelligent Heat Shrinkable Film Defect Visual Inspection System Application

1.Heat-shrink film defects and spray code date detection on the barrel surface
2.Similar barrel surface food heat shrink film defects and code printing date detection
3.Detection of heat shrinkage film defects of other products (need to be tested according to physical evaluation)

*Techik Intelligent Heat Shrinkable Film Defect Visual Inspection System Structure

1.Front-end drainage section: to ensure the spacing and relative position of the barrel surface, is the premise of reliable detection
Optional function: if the status of the front barrel surface cannot be guaranteed, the bucket detection and corresponding removal device can be added
2.Top detection section: detect the damage defect on the top of the heat shrink film on the bucket surface
Optional function: if there is a need for the bottom hole defect and date spray code detection, the bottom detection function can be optional
3. Side detection section: 4 cameras in different angles can detect holes and fold defects on the barrel surface, realizing 360 detection without dead angle
4. Back-end reject section: air blow rejecters can remove the defective products to realize the separation of qualified products and defective products.